Autel Robotics · Instant quote

Autel Robotics EVO II Pro 6K RTK Rugged Bundle Drone

V2, V3

Version:

Batteries included:

Cosmetic Condition

Functionality

The Autel Robotics EVO II Pro 6K RTK Rugged Bundle is a prosumer and light-enterprise drone built around a 1-inch camera sensor and a mountable RTK module, released in 2021 and refreshed in 2022. It shipped for mapping crews, inspectors, and serious hobbyists who needed centimeter-accurate positioning without stepping up to a full survey rig. Autel updated the line through V2 and V3 hardware revisions, but the core camera and flight system carried over, which is why used units still hold value on the secondary market: the RTK module and rugged case contents are the expensive parts to replace new. Pick your version and battery count in the configuration tool above for a live cash offer, or see how the process works before you commit. If you would rather compare it against other camera and drone gear first, you can start from the sell your camera category page and come back once you know what your setup is worth.

Confirm you have the EVO II Pro 6K RTK Rugged Bundle

Open the Autel Explorer app with the aircraft powered on and connected to the Smart Controller, then check the Device or About screen. It shows the aircraft model, firmware version, and serial number, which is the fastest way to confirm you have the RTK variant and which hardware revision it is. You can cross-check the same serial number against the sticker on the underside of the aircraft, near the battery bay.

V2

  • Serial number and app firmware log show the V2 hardware revision
  • RTK module seated on top of the aircraft, above the gimbal
  • Ships with the Smart Controller, not the screenless standard remote

V3

  • Serial number and app firmware log show the V3 hardware revision
  • Same RTK module mount and Smart Controller pairing as V2
  • Box and case labeling reference the later production batch

Prefer a visual check? A genuine RTK Rugged Bundle comes in a hard carrying case with cut foam for the aircraft, batteries, and an ND filter set. Look for the RTK module clipped to the top of the drone body, and a Smart Controller with a built-in screen rather than a plain remote with a phone clamp.

Core hardware

Camera & sensor

  • 1-inch CMOS sensor
  • 6K/30fps and 4K/60fps video, H.264/H.265
  • 20MP stills
  • Adjustable aperture, f/2.8 to f/11

Gimbal & sensing

  • 3-axis mechanical gimbal stabilization
  • Omnidirectional obstacle avoidance sensors

Positioning (RTK)

  • RTK module for centimeter-level positioning with a base station or network correction
  • Falls back to standard GPS/GLONASS/Galileo without an RTK fix

Storage

  • MicroSD card slot on the aircraft for footage and stills
  • No usable footage stored without a card installed

The battery count you select above matters for value as much as the aircraft itself. A bundle with three healthy batteries and its RTK module intact is worth noticeably more than an aircraft alone, since replacing either piece new is expensive relative to a used drone.

Display & audio

The Smart Controller included with the Rugged Bundle has a built-in high-brightness display, viewable in direct sunlight, running the Autel Explorer app for live HD video feed, flight telemetry, and RTK status.

The controller has a built-in speaker for flight alerts and voice prompts. The aircraft itself has no microphone or speaker; drone footage does not include recorded audio.

Each aircraft binds to one Smart Controller through the app. A used unit should have that binding cleared and the RTK module unpaired before it changes hands.

Ports & connectivity

Everything routes through the Smart Controller and a short-range transmission link between it and the aircraft.

Wired
  • USB-C on the aircraft for data and firmware
  • USB-C charging port on the Smart Controller
  • MicroSD card slot on the aircraft
  • USB ports on the battery charging hub
Wireless
  • Long-range SkyLink transmission between aircraft and controller
  • Wi-Fi on the Smart Controller
  • GPS/GLONASS/Galileo, with RTK correction input

6K camera 1-inch CMOS sensor RTK positioning Omnidirectional obstacle avoidance Smart Controller Foldable design Rugged hard case Hot-swappable batteries

Battery, build & more

Intelligent flight batteries are hot-swappable and each is rated for close to 40 minutes of flight time under good conditions. Battery health and cycle count both affect resale value.

Foldable arms bring the aircraft down to a compact travel size, and the airframe is built for field use rather than desk decoration.

A complete Rugged Bundle includes the hard carrying case, an ND filter set, and the batteries you select in the picker above, plus the charging hub.

This model sits in the enterprise-adjacent mapping and inspection tier, which is why demand stays steady even as newer Autel and DJI models ship.

Frequently asked questions

01 How do I find the model number or exact configuration?
Open the Autel Explorer app with the drone connected to the Smart Controller and check the Device or About screen. It lists the aircraft model, firmware, and serial number, which tells you whether you have the V2 or V3 hardware revision. You can confirm the same serial against the sticker on the underside of the aircraft near the battery bay. Check your case contents against the picker options above, since the number of batteries included changes what the bundle is actually worth.
02 How do I tell it apart from the standard, non-RTK EVO II Pro bundle?
Look for the RTK module clipped to the top of the aircraft, mounted above the gimbal and camera. The standard EVO II Pro bundle has no such module and a bare top shell. The Autel Explorer app will also confirm RTK capability under the aircraft's Device settings. If the module is missing or damaged, note that when you configure your quote, since it is a meaningful part of the bundle's value.
03 Can I sell it with damage, a dead battery, or an account still bound to it?
Yes. Cracked props, a bad gimbal, a battery that won't hold a charge, or an aircraft that won't power on can still be sold; select the matching condition above and the quote adjusts accordingly. The one thing you must do first is unbind the aircraft from your Autel account and clear the Smart Controller pairing, since a bound drone cannot be resold or reactivated by the next owner. Remove any microSD card as well, both for your privacy and to avoid it going missing in transit.
04 What raises the trade-in value the most?
A complete Rugged Bundle with the hard case, ND filters, and as many original batteries as you can include raises the offer the most, since those pieces are costly to buy separately. An intact, working RTK module matters almost as much as the aircraft itself. Low flight hours, undamaged props and gimbal, and batteries that still hold a reasonable charge all help. Selling the full kit together rather than the aircraft alone will get you more than piecing it out.
05 How do I erase it, remove my account, and get paid?
Open the Autel Explorer app, go to the aircraft's account or binding settings, and unbind the drone from your Autel account, then remove the Smart Controller pairing from its own settings menu. Format or remove the microSD card so no footage travels with the drone. Reset the Smart Controller to factory settings from its system menu if that option is available. Pack the aircraft, controller, batteries, and accessories back into the rugged case the way they were foam-fitted at purchase. Shipping is free and insured, and payment goes out after our team tests the unit, by PayPal, Venmo, Zelle, CashApp, or check. Full erasure steps for other device types are on our data erasure protocols page.